 |
Now get your Fourwinds II Pole Mount in a pre-wired kit! That's right, we do it all for you! No more crimping, soldering or trying to read a schematic you don't really understand. Install your pole, set your Fourwinds-II on top and plug in the generator to our ready-to-mount regulator and connect two pair of wires to your battery bank.
Kit Includes:
• Fourwinds II Brushless Wind Generator
• 9 foot Mounting Pole & 8 foot pair of braces
• All mounting hardware, including a swivel base to mount on any angle!
• Voltage Regulator & Divert Load (all polycarbonate-mounted)
• 20 feet of wire from the Generator
• 10 feet of wire to the batteries
• Nothing else to buy!
A new Fourwinds II kit has all these great features:
• Annodized exterior for longevity
• Starts charging at 5 knots
• 90 to 140 AMP Hours in 8 to 10 knots (your anchorages are typically less than 10 knots of wind)
• You're producing when others are still waiting for more wind!
• Turbulators keep our blades super quiet
• Centrifugal air brake option gives over-speed control
• 360 degree rotation - indefinitely!
• Dynamically balanced blades insure smooth operation
• With our brushless generator you and your neighbors' SSB & radios will be static free
Specifications
• Blades: "Glassflex" solid fiberglass
• Generator Type: Brushless with Neodininim Magnets
• Generator Finish: Red Anodized Aluminum
• Output: 12V DC, 22 Amps (300 watts) 24V DC, 11 Amps
• Over speed control: Stainless Centrifugal Air Brake
• Propellor Diameter: 60" (152.4 cm), 2 blades
• Rudder Material: 1/4" (6.35 mm) Lexan
• Rudder Length: 32" (81.28 cm)
• Voltage Available: 12V or 24V
• Voltage Regulator: 12V or 24V to 60 Amps
• Weight: 19 - 22 lbs (10 kg)
• Warranty: Three years, up to 50 knots wind
Relevant Links:
Key Measurements
Mounting Options
Electrical Recommendations
Wind Generator Comparison
Cruising Considerations
Simpler Solution
Typical 12V Equipment Power Requirements