NOTE: This page has moved! Please update your bookmarks and links. You will be redirected shortly...
Generators
Red Baron
Fourwinds II
Solar Panels
Panels
Flexcharge Controllers
Blue Sky Controllers
Alternators & Regulators
Balmar
LED Lighting
Interior
Exterior
Navigation
Flashlights
Pelican Lights
Inverters & Chargers
Prowatt
Xantrex
Truewave
Batteries
Nanopulser
Lifeline
MK Powered
Optima
Trojan
Rolls
Water Makers
Fourwinds SolarSurvivor
Katadyn
Village Marine
Spectra
Protection System
Refrigeration
Mermaid Air
Avxcel
Fuel System
Mr. Funnel
Algae-X
Zephyr Fuel Polisher
Boat Show Bests
Lightning Master
Wiring & Supplies
Latitude 43 Boat Soap
BridgeNorth Bailer
Nantucket Baggs
Remote Light Switch
Personal Retreiver
Marine BBQ's
SplicingNut
Low Voltage Monitor
Protective Cases
Diving
 
 
Search Our Site
 

| Survivor-06 | Survivor-35 | PowerSurvivor-40E |
| PowerSurvivor-80E | PowerSurvivor-160E | Accessories & Parts |


Frequently Asked Questions


Survivor-06:



The smallest hand-operated emergency desalinator in the world.
- Compact and lightweight
- Recommended for emergency liferafts and individual survival kits
- Trusted by militaries and individuals around the globe 

Specifications:
Water Production (+/- 15%): 1 oz/2 min (890 ml/hour)
Weight: 2.5 lbs (1.1 kg)
Dimensions: 5" x 8" x 2.5" (12.7 x 20.3 x 6.4 cm)
Salt Rejection: 98.4% average (95.3% minimum)
Average Pump Rate: 40 strokes/minute
US Coast Guard Approval Number: 160.058/7/0


Facts Sheet                 Manual


Survivor-35:



The most widely-used emergency desalinator
- Produces up to 4.5 litres per hour
- Produces enough water for multiple person liferafts
- Widely used by US and international military forces, voyagers, sea kayakers, and other adventurers

Specifications
Water Production (+/- 15%): 1.2 gallons/hour (4.5 liters/hour)
Weight: 7 lbs (3.2 kg)
Dimensions: 5.5" x 22" x 3.5" (14 x 55.9 x 8.9 cm)
Salt Rejection: 98.4% average (95.3% minimum)
Average Pump Rate: 30 strokes/minute
US Coast Guard Approval Number: 160.058/6/0


Facts Sheet                 Manual


PowerSurvivor-40E:



This compact, highly durable 12-volt watermaker is our contribution to improving life on board. It is the smallest and least expensive power watermaker available.  

Simplicity - The 40E contains 40% fewer parts than its popular predecessor, the PowerSurvivor-35. Simplified construction and rugged design make the 40E remarkably easy to install, operate and maintain.
Compactness - Extraordinarily compact, the 40E can be installed in the nooks and crannies otherwise unusable in many yachts.
Efficiency - No watermaker draws so few amps. Using only 4 amps, the 40E can run for extended periods on alternative power alone.
Durability - The heart of the 40E is the rugged stainless high-pressure pump. Armed for the rigors of the marine environment, this watermaker is built to last. We're so certain, we've covered it with a superior warranty: 3 years on most components. 

Specifications
The PowerSurvivor-40E delivers 1.5 gallons per hour. It is the only power watermaker that converts to manual operation in emergencies.

Power Requirements: 12 volts DC (draws 4 amps)/24 volts DC (draws 3 amps)
Water Production (+/- 15%): 1.5 gallons/hour (5.7 liters/hr)
Weight: 25 lbs (11.33 kg)
Dimensions - Pump :
Height: 6.75" (17.2 cm)
Length: 16.5" (41.9 cm)
Width: 15.5" (39.4 cm)
Dimension - Prefilter Module:
Length: 12" (30.5 cm)
Diameter: 6" (15.2 cm)  (allow 7"(18 cm) for hose bend)
Feedwater Flow Rate: 20 gallons/hour (75.7 liters/hour)
Salt Rejection: 98.4% average (96% minimum)


Facts Sheet                 Manual


PowerSurvivor-80E:


          

The rugged model 80E produces over 3 gallons per hour. Best of all, it is both easy to maintain and efficient, drawing only 8 amps.

Simplicity - The 80E is remarkable for its simplicity. As a result you can perform periodic maintenance with a few common tools and easy to follow instructions.
Compactness - Relative to its output, the 80E is extraordinarily compact. For those with fewer space constraints, the 80E is offered in an attractive vibration-dampening enclosed variation.
Efficiency - With the patented Energy Recovery System, the 80E produces volumes of water at a fraction of the energy used by conventional watermakers.
Durability - The 80E uses 316 stainless steel for pump housings. As with all of our models, they are covered by the best warranty in the business: 3 years on most components.

Specifications
The PowerSurvivor-80E delivers 3.4 gallons per hour. It is available in two variations: Modular and Enclosed.

Power Requirements: 12 volts DC (draws 8 amps)/24 volt DC (draws 5 amps)
Water Production (+/- 15%): 3.4 gallons/hour (12.9 liters/hour)
Weight:
Modular: 34 lbs (15.4 kg)
Enclosed: 49 lbs (22.2 kg)
Dimensions (Modular):
Pump:
Height: 6" (15.2 cm)
Length: 16" (40.6 cm)
Width: 14" (35.6 cm)
Membrane Module:
Length: 31" (78.7 cm)
Diameter: 2.5" (6.4 cm)
Dimensions (Enclosed) :
Pump:
Height: 9.3" (23.6 cm)
Length: 20.8" (52.8 cm)
Width: 17" (43.2 cm)
Prefilter Module:
Length: 12" (30.5 cm)
Diameter: 6" (15.2 cm) (allow 7" (18 cm) for hose bend)
Feedwater Flow Rate: 34 gallons/hour (128.7 liters/hour)
Salt Rejection: 98.4% average (96% minimum)
Hand-held Salinity/TDS Meter: Standard


Facts Sheet                 Manual


PowerSurvivor-160E:



The 160E model offers the same reliable performance as the 80E, with nearly double the output. It's a great choice for larger crews.

Simplicity - The 160E is the easiest to maintain of any product at this output level. Periodic maintenance can be performed with only a few common tools and easy to follow instructions. Simple to install, operate and maintain.
Compactness - The 160E is very compact. With separation of the membrane module and the pump/motor unit, the 160E can fit into even the tightest of spaces.
Efficiency - Using the patented Energy Recovery System, the 160E produces copious amounts of water with low energy consumption.
Durabilty - The 160E uses 316 stainless steel for pump housings. As with all of our models, they are covered by the best warranty in the business: 3 years on most components.

Specifications
The PowerSurvivor-160E delivers an impressive 6.7 gallons per hour with the simplicity of the smaller systems.

Power Requirements: 12 volts DC (draws 18 amps)/24 volt DC (draws 12 amps)
Water Production (+/- 15%): 6.7 gallons/hour (25.4 liters/hour)
Weight: 36 lbs (16.3 kg)
Dimensions:
Pump:
Height: 6" (15.2 cm)
Length: 16" (40.6 cm)
Width: 14" (35.6 cm)
Membrane Module:
Length: 25" (63.5 cm)
Diameter: 3.5" (8.9 cm)
Prefilter Module:
Length: 12" (30.5 cm)
Diameter: 6" (15.2 cm) (allow 7" (18 cm) for hose bend)
Feedwater Flow Rate: 80 gallons/hour (302.8 liters/hour)
Salt Rejection: 98.4% average (96% minimum)
Hand-held Salinity/TDS Meter: Standard

Facts Sheet                 Manual


Accessories & Parts :





Silt Reduction Kit
Protects pump and membrane from excessive exposure to silt and other suspended particles.
- 1 x 1 Amp 12 Volt Booster Pump
- 2 x 5 Micron Prefilters
- All Necessary Fittings


Extended Cruise Kit
Includes items needed for regular care and periodic maintenance and/or storage.

- 1 x Acid Cleaner
- 2 x Alkaline Cleaner
- 6 x 30 Micron Prefilters
- 1 x Repair Seal Kit
- 1 x Biocide
 

Preventative Maintenance Package Includes the contents of both Silt Reduction and Exstended Cruise Kits. Recommended for all long voyages.

- 1 x 1 Amp 12 Volt Booster Pump
- 2 x 5 Micron Prefilters
- 1 x Acid Cleaner
- 2 x Alkaline Cleaner
- 6 x 30 Micron Prefilters
- 1 x Repair Seal Kit
- 1 x Biocide
- All Necessary Fittings


 
 
Order Online Today!
Let us provide a complete Solution for you!



 
Sales
Phone:
941.575.4404
Fax:
941.575.4080
   Fourwinds Enterprises, Inc
   1205 Elizabeth Street
   Punta Gorda, FL 33950
   N 26° 55.6685
   W 082° 02.6963